Recreus PETG

£23.89 £19.91
SKU
RECREUS-PETG

Recreus PETG

The Recreus PET-G filament presents excellent mechanical properties comparable to ABS. High adhesion between layers make it the perfect material to produce technical parts and forget about warping and cracking problems. The Recreus PET-G does not need a hot table for certain pieces with reduced size, for larger pieces its recommended to use a Hot-bed between 45-60ºC.

PETG filament is FDA approved and food safe, meaning it can be used in the food and medical industries.


Technical Features

  • Diameter tolerance +/- 0.03mm
  • Excellent mechanical properties
  • High interlayer adhesion
  • Heat-bed temperature 45-75ºC (You can use 3D Lac or similar adhesives)
  • Glossy and high transparency
  • Odourless
  • Solvent resistant (acetone, paint solvent etc)
  • New winding process 100% knot-free

Printing Recommendations

  • Layer Height: 0.08-0.3 (for 0.4mm nozzles) Optimum results 0.15mm
  • Speed: 15-100mm / s. Optima 35-45 mm/s
  • Temperature: 235-260 Celsius. Optimum 240ºC
  • Retraction Speed: 25-160mm/s
  • Retraction Length: 3.5-6.5mm (optimum 4.5mm)
  • Travelling speed: 120-180mm/s
More Information
Material PETG
Technical Specifications

Tech Specs

Physical Properties Spool size: 750g
Diameter: 1.75mm
Density: 1,29 g/cm³
Hardness Shore: D 76
Elongation at break: 31%
Tensile Modulus: 3020 Mpa
Flexural Modulus: 2040 Mpa
Flexural Strenght: 68 Mpa
Vicat Softening temp: 82°C
Izod Impact Resistance: 4.4 KJ/m2
Printing Recommendations Layer Height: 0.08-0.3 (for 0.4mm nozzles) Optimum results 0.15mm
Layer Height: 0.08-0.3 (for 0.4mm nozzles) Optimum results 0.15mm
Speed: 15-100mm / s. Optima 35-45 mm/s
Temperature: 235-260 Celsius. Optimum 240ºC
Retraction Speed: 25-160mm/s
Retraction Length: 3.5-6.5mm (optimum 4.5mm)
Travelling speed: 120-180mm/s
Write Your Own Review
You're reviewing:Recreus PETG

What's in the Box


  • 1 x Recreus PETG