Fast Configurable Extruders with Spitfire System
The Spitfire System is Wasp’s configurable and fast extruder, this innovative system brings a new generation of extruders.  The modular architecture allows you to mount a cartridge and nozzle specifically for any 3D printing need.

 

 

Extractable Cartridge
The cartridge consisting of nozzle, barrel and plug, which is now removable with a simple screw, is the heart of the Spitfire System and gives the new WASP extrusion system the utmost modularity and versatility. From now on, the extruder can be configured depending on the different printing needs.

  

New Resistance
Featuring a new resistance that can heat the nozzle up to 350°C to print technical materials.

 

High and Low Temperatures
This system gives you the option to choose between two different cartridges, one for low temperature prints (LT) and one for high temperature prints (HT). This guarantees long lasting extruders and minimizes friction.

 

Interchangeable Nozzles
There are three nozzle sizes available (0.4, 0.7 and 1.2mm), each for a specific need.

 

The Spitfire is an innovative system that, through various configurations, allows you to respond to different printing needs. When printing with the Spitfire System you will be able to produce strong and high quality printed pieces and this extruder can be heated up to a temperature of 350°C. All configuration or change operations are quick and safe with the Spitfire System. This system can be installed across the entire line of DeltaWASP printers.

 

  

 

The Spitfire System comes in Red and Black.

 

Spitfire Black
This version of the Spitifre System is compatible with the DeltaWASP 20 40, DeltaWASP 40 70, DeltaWASP 60 100 and DeltaWASP 20 40 Turbo.

 

Spitfire Red
This version of the Spitifre System is compatible with the DeltaWASP 20 40 Turbo 2 and DeltaWASP 40 70 Industrial

 

 

You Decide What to Print, Wasp Give You the Right Extruder
The Spitfire Extruder with Teflon Spitfire (LT) Cartridge is for low temperature prints (indicated for PLA, PETG and FLEX). The Spitfire version with the Teflon Spitfire (HT) Cartridge is for high temperature prints (indicated for ABS, PA, PC, HIPS, PA + C, ASA, PMMA and PP).

 

Removable Cartridge with a Simple Screw Thread
The idea behind the new Spitfire System is to extract and replace a cartridge (consisting of a nozzle, barrel, and grab) with a simple screwdriver, depending on the different printing needs and related materials that you want to print.