METHOD - Bridging the gap between industrial and desktop 3D printing.

 

The NEW Makerbot METHOD is the first Industrial Desktop Printer that gives you features that were previously only available on industrial 3D printers at a lower cost.

 

Makerbot 3D Printer

Features 

 

Dual Performance Extruders

SPEED AND PRECISION

The Dual Performance Extruder system is built from the ground up to accelerate print times and produce precise parts.

 

- Smart sensors for material management and print protection

- Greater torque with a 19:1 dual-drive gear ratio

- Lengthened thermal core with less than 60-second heat up time

 

Dry-Sealed Material Bays

OPTIMIZED MATERIAL STORAGE

Dry-Sealed Material Bays form a near-perfect seal to keep material free of damaging humidity. A suite of built-in sensors provides that your material is stored in its optimal environment - a feature previously only available in industrial 3D printers.

 

Dissolvable Support System

UNRESTRICTED GEOMETRIC FREEDOM

Superior surface finish and unrestricted geometric freedom are paramount to delivering high quality printed parts. MakerBot Water-Soluble PVA ensures fast and effortless support removal without compromising part design or dimensional accuracy.

 

MakerBot Water-Soluble PVA provides two key benefits:

- Unrestricted geometric freedom (large overhangs, cavities, etc.)

- Superior print quality and surface finish

 

Circulating Heated Chamber

UNCOMPROMISED LAYER ADHESION AND PART STRENGTH

Control the temperature and quality of every layer - not just the first. While heated build plates are effective at reducing warping, Method takes this further with full active heat immersion during the entire duration of the print.

 

 

 

Demo's of the Makerbot METHOD will begin in February, and delivery to Europe wont be available till April. If you would still like to get a head start on plans and funding then click here to contact us for a quote!