Great Summer MakerBot deals valid until the 29th of June, so make sure to take advantage of them while you can!

 

Buy the MakerBot Replicator+ 3D Printer and receive a 10 Pack of Large PLA Free!
Buy the Replicator+ by the 29th of June and you will get a free 10 pack of Large PLA for free, meaning you will experience savings of  £467.54/€531.30

Buy the MakerBot Replicator Z18 3D Printer and receive a 10 Pack of Large PLA and an Experimental Extruder Free! 
Buy the Z18 by the 29th of June and you will get a free 10 pack of Large PLA for free as well as a free Experimental Extruder, meaning you will receive savings of 
£644.40/€732.27!


MakerBot Replicator+
The MakerBot Replicator+ 3D Printer is from the latest Generation of MakerBot 3D Printers. The MakerBot Replicator+ 3D Printer combines unparalleled performance with superior results and lasting reliability. The printer has a 25% larger print bed than the MakerBot Replicator Desktop (11.6 x 7.6 x 6.5 inches). To ensure consistent performance, the MakerBot Replicator+ 3D Printer has been re-engineered by MakerBot and rigorously tested for over 380,000 hours across multiple facilities to ensure consistent performance.



MakerBot True Colour Large PLA
The MakerBot PLA Filament is safe for use in the classroom, office or home. It’s non-toxic and easy to print with minimal warping or curling. The MakerBot True Colour PLA is also the best and most consistent filament for the MakerBot Replicator+, MakerBot Replicator Mini+ and the previous Replicator models including the Z18. With the MakerBot PLA filament you will be able to print high quality 3D printed objects. The MakerBot True Colour PLA demonstrates much less warping and curling than ABS, meaning a heated bed isn’t required when using PLA. The MakerBot True Colour PLA has a glossy look and feel and prints sharp edges and corners well.



MakerBot Replicator Z18
The MakerBot Replicator Z18 3D Printer has a massive build volume, you will be able to make extra-large and ultra-tall industrial prototypes, models and products. Using the MakerBot Replicator Z18 3D Printer you will also be able to print multiple things at once, so you can get to work on your next design sooner. The MakerBot Replicator Z18 3D Printer is the largest member of MakerBots’ 5th Generation family, with a build volume of 30.5(w) x 30.5(l) x 45.7(h) cm. You can send print files to your 3D printer via Wi-Fi, USB, Ethernet or with a USB drive. Control your MakerBot Replicator Z18 3D Printer via MakerBot Print or remotely with MakerBot Mobile.



MakerBot Experimental Extruder
The MakerBot Experimental Extruder has been designed for the MakerBot Replicator, Replicator+, Replicator Mini, Replicator Mini+ and the Replicator Z18. This extruder is for the advanced user who wants to push the limits of what’s possible on their MakerBot 3D Printer. With the MakerBot Experimental Extruder you will be able to customise your 3D printing experience with a modifiable hardware design and interchangeable nozzles.

The Experimental Extruder is an experimental product and is not covered under warranty or MakerCare.