E3D Titan Aero Extruder with V6 HotEnd

As low as £96.75
SKU
TITAN-AERO-EXT

E3D Titan Aero Upgrade Kit

Performance, Power, Push. The E3D Titan Aero Upgrade Kit brings high performance, lightweight extrusion to everyone. The E3D Titan Aero Upgrade Kit is the compact combination 2.85mm HotEnd and Extruder from E3D. Customise your Titan Aero to suit your 3D printer, and easily experiment with the E3D ecosystem of printing parts. All the lightweight performance, reliability and usability of V6 and Titan.


Power + Performance for your 3D Printer

E3D Titan Aero Upgrade Kit integrates the Titan extruder and V6 HotEnd into one neat little package. All the lightweight performance, reliability and usability of V6 and Titan, along with some benefits all of its own. This extruder also comes with the E3D compact but powerful motor and the titan motor bracket.


Compact + Rigid

By combining a hot end and extruder, Titan Aero is ultra compact. It offers you an extra 25mm of Z-axis build height compared to a V6 + Titan combo.

Compact also means rigid. Aero copes brilliantly with knocks and bumps, allowing it to work with the fastest of 3D printers.


Accurate Extrusion; Great for Flexibles

By having a short, well constrained filament path, the E3D Titan Aero Upgrade Kit is great for flexibles. It minimises places where filament can bend, buckle and jam, giving a better flexible printing experience.


Ecosystem Compatible, All Metal HotEnd

E3D Titan Aero Upgrade Kit is built on the E3D V6 all metal design, allowing you to reliably 3D print any thermoplastic at temperatures up to 285°C.


It’s also been designed to take standard V6 heatbreaks, so that you can interchange components from E3D’s entire modular ecosystem to suit your needs.


Easy to Install, Easy to Use

Aero is mounted using a standard hole pattern, allowing it to be fitted onto a wide range of 3D printers and making designing mounting solutions straightforward to do.


By using Titan’s custom engineering and rigorously tested extrusion mechanism, Aero is highly reliable and retains all of the smart usability features. It’s a breeze to load and unload filament, manually extrude, adjust idler tension, and clean out debris from the hobb.


Likewise the use of Titan’s 3:1 gearing ratio allows the use of smaller motors, making for a lighter weight carriage whilst maintaining reliability and pushing power.


Standard v. Mirrored Versions

Choose from Standard orientation (left) or Mirrored (right). Mount two side-by-side for easy, reliable dual extrusion with maximum build volume.


Write Your Own Review
You're reviewing:E3D Titan Aero Extruder with V6 HotEnd

Whats in the Box

*For the Full Kit with the Compact Motor and Mounting Bracket.


Machined Parts

  • Titan Aero Heatsink
  • V6 Heatbreak
  • V6 Heater Block
  • V6 Brass 0.4mmm Nozzle

Plastic Parts

  • Titan Body (prefitted with bearing and threaded insert)
  • Idler Lever (prefitted with bearing)
  • 2.85mm Filament Guide
  • 1.75mm Filament Guide
  • Titan Motor Bracket add on

Cold Side Fixings

  • Mounting Screws for 2mm mounting plate.
    • 3 x M3x30
    • 1 x M3x8
    • 1 x M4 Thumbscrew
    • 1 x M4x10 Button Head Screw
    • 1 x M4 Nut
    • Idler Spring
  • 4 x Self-tapping Screws
  • Shake-proof Washer
  • Pinion Gear Grub Screw
  • Bearing

Hot Side Fixings

  • 1 x M3x10 Button Head Screw
  • 1 x M3 Washer
  • 1 x M3x4 Grub Screw
  • Hex Wrenches
    • 1.5mm
    • 2mm
    • 2.5mm

Gears

  • Steel Pinion Gear
  • Acetal Gear

Electronics

  • A Compact but Powerful Nema17 stepper motor with 1.0m wiring and 40mm Body length
  • 40x40x10mm Fan (12V or 24V)
  • 30W Heater Cartridge (12V or 24V)
  • 1 x Thermistor Cartridge
  • 2 x Connector Cables (for fan and thermistor)

Other

  • Sachet of Thermal Paste
  • 100mm Length of 4mm OD PTFE