E3D V6 All-Metal HotEnd

As low as £46.23
SKU
E3D-V6-AM

E3D V6 All-Metal HotEnd

The E3D V6 All-Metal HotEnd is E3D’s market-leading Hot End and it has an all-metal design and it’s British engineered with high-temperature performance.

Print the Widest Possible Range of Materials

The E3D V6 All-Metal HotEnd features a signature all-metal design that allows you to reliably print high temperature materials and E3D have added extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer.

High Temperature Performance

The E3D V6 All-Metal HotEnd can comfortably reach 300°C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400°C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. The PTFE filament guide inside the v6 All-Metal HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating.

Compact

E3D have focused on cutting as much bulk from the E3D V6 All-Metal HotEnd as possible, this means an overall length of just 62mm and low bulk in X/Y dimensions.

The v6 All-Metal HotEnd is Easy to Use

E3D’s new thermistor cartridge simply slides into place and is secured with a single screw. E3D uses high temperature glass sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping.

High Quality Printing

With the E3D V6 All-Metal HotEnd, E3D have kept their sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding, as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing.

Adaptable

The E3D V6 All-Metal HotEnd is a fully-integrated part of the E3D Ecosystem. E3D’s range of nozzles and blocks gives you more opportunity to choose how you want to print. You can choose from different filament diameters and materials to take your printing to the next level and upgrade for ultra high-temperature printing!

More Information

Tech Specs

Max Temperature: 400°C+
Print Speed: 20 – 100mm/2
Ease of Use: Intermediate
Filament Diameter: 1.75 or 3mm
Write Your Own Review
You're reviewing:E3D V6 All-Metal HotEnd

Whats in the Box

Metal Parts

Included with every V6 HotEnd

  • 1 x Aluminium Heatsink
  • 1 x Stainless Steel Heat break
  • 1 x Brass Nozzle (0.40mm)
  • 1 x Aluminium Heater Block

Electronics

Included with complete V6 HotEnds

  • 1 x Thermistor Cartridge
  • 1 x 30w Heater Cartridge (12V or 24V)
  • 1 x 30x30x10mm fan (12V or 24V)

v6 Assembly
(Size: 200.4 KB)