SCA-1200HT Cleaning Bath

£2,165.04
SKU
570-10006

Stratasys SCA-1200HT Support Cleaning

The Stratasys SCA-1200HT support cleaning is specifically designed for the removal of soluble support materials on 3D printed parts. The units are compatible with all Stratasys soluble support materials and corresponding build materials in conjunction with all recommended support removal concentrates – ABS, ASA, PC, Nylon, and PolyJet Resins. The SCA-1200HT’s versatility and efficient cleaning performance result from PADT’s experience as a user and distributor of the SCA and Stratasys FDM systems since their introduction.

The Stratasys SCA-1200HT support cleaning includes a "no-heat" option to use the device with the heater turned off, perfect for PolyJet parts.


Key Features:

  • Removes soluble support from ABS, PC and nylon 3D printed parts
  • User-selectable temperature presets at 50, 60, 70, and 85°C
  • New models include "no-heat" option
  • User-controlled timer
  • Uses cleaning solutions from Stratasys
  • Unique spray nozzle optimizes flow coverage
  • Whisper-quiet operation
  • Easily accessed drain on front
  • Stainless steel tub and basket
  • Over temperature and water level alarms
  • Automatic halt of operation with alarms
More Information

Tech Specs

Physical Characteristics: Height - 520 mm (20.5 in)
Width - 445 mm (17.5 in)
Depth - 660 mm (26 in)
Weight - 29 kg (64 lbs)
Capacity: Tank - 46.3 L (12.2 gal)
Large Basket - 250 x 250 x 300 mm (10 x 10 x 12 in)
Small Basket - 100 x 100 x 100 mm (4 x 4 x 4 in)
Weight - 29 kg (64 lbs)
Pump Max Flow Rate: 38 LPM / 10 GPM
Temperature Settings: 50, 60, 70 and 85C; +/- 2C
Power Requirements: 110-240 VAC, 50.60Hz, 15A
Heater power = 1,300 Watts
Safety Standards: CE/CSA/UL Certified
Cleaning Solutions: SCA-1200HT uses WaterWorks Soluble Concentrate or EcoWorks to remove supports.
Write Your Own Review
You're reviewing:SCA-1200HT Cleaning Bath

Whats in the Box

  • SCA-1200HT Cleaning Bath