0
×

Registration

Customer Details

Login Information

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Testimonials

Toby from the Bartlett School of Architecture, UCL sent Daemon3D Print their damaged extruder for us to repair, which we were happy to do at Daemon3D Print and Toby said the following about our services:

"Thanks for offering to repair our extruder, we received the Prusa i3 HotEnd Extruder in the mail and it works perfectly, we just wanted to thank you for your help"


 

Stuart at Rollem contacted Daemon3D Print looking to place regular filament orders for his MakerBot printers, Daemon3D Print recommended the new COLD PLA to him and he has the following to say about the product:

"We have 2 Makerbot printers working 24 hours per day, we used to print with an older machine with ABS and had lots of trouble, warping, lifting etc.; now we have used 5 reels of COLD PLA so far and results are tremendous, easier to print than ABS by far (cold bed on blue tape for example), models that are very strong, some pieces just cannot be broken by hand and an excellent quality, zero filament jams so far.

"We use the COLD PLA for brackets, sensor mounts, covers, paper deflectors in models up to 30cm x 30cm x45cm.  Saving us an absolute fortune compared to the machined and sheet metal parts it replaces.  All going into machinery to produce playing cards."


 

Paul at JASP Design recently contacted us looking for a high quality filament to use with his Ultimaker 3D Printer. He told us that he had been trying many different filaments and had been experiencing mixed results. So we suggested our Daemon3D Recommends filament to him and delivered a sample pack of different colours, in both ABS and PLA 3mm Samples for him to test. This was what Paul had to say after his first print with the Orange Colour:

“The orange has come out very well. Nice print quality. The colour is a little translucent and could be used to good effect if you wanted to light it from behind.”


 

Jonathan Groves bought some 3D Lac Adhesive Spray through our Amazon Sales Channel. He previously had problems with prints becoming unstuck and warping during printing. After purchashing the product Jonathan was kind enough to leave some feedback about the product:

"A glowing review for your astonishing product which has completely revolutionised my 3D printing. It’s quite literally amazing how well this works. Thanks so much."


 

 

website designed by web2market

My Cart

You have no items in your shopping cart.