3DMakerpro Owl LiDAR Scanner
3DMakerpro Owl Imaging Laser Scanner
The 3DMakerpro Owl is a stationary imaging laser scanner designed for capturing buildings, interiors and other large-scale physical environments as detailed digital 3D data. Combining LiDAR measurement with a three-camera imaging system, Owl captures spatial geometry alongside colour and visual information to create full-colour point clouds and polygonal 3D models.
Designed for workflows such as architecture, building documentation, facilities management, heritage capture and large-area spatial digitisation, Owl provides a scanning radius of 0.5 to 60 metres at 20% reflectivity, with 360° horizontal coverage and a 280° vertical field of view. Its fixed-position scanning approach is intended to capture a large amount of surrounding geometry from each scan location while reducing the number of positions required across suitable open spaces.
With an accuracy specification of 5 mm at 10 metres, point cloud acquisition at up to 158,000 points per second, three 48 MP cameras and on-site iPad preview over Wi-Fi 5, Owl brings geometry capture, colour imagery and field verification together in a single spatial scanning system.
Capture Large Spaces from Fewer Scan Positions
Owl combines a 0.5–60 m scanning radius with 360° horizontal and 280° vertical coverage, allowing large sections of a building, room or site to be recorded from each suitable scanner position.
360° Large-Area LiDAR Scanning
Owl is built around large-field stationary scanning, with a specified scan radius of 0.5 to 60 metres on surfaces with 20% reflectivity. A 360° horizontal scanning angle and 280° vertical field of view allow the scanner to collect surrounding geometry across a broad area from a fixed position.
This makes Owl particularly suited to rooms, halls, factories, venues and building interiors where capturing more of the environment from each position can reduce unnecessary repositioning. As with any terrestrial laser scanner, physical obstructions such as walls, columns, machinery and furniture can still create areas that require additional scan positions.
Full-Colour Spatial Capture with Three 48 MP Cameras
LiDAR records the three-dimensional geometry of the environment while Owl's three 48 MP cameras capture corresponding visual information. The camera system records colour, materials, lighting and scene appearance so spatial data can be represented as a colourised 3D environment rather than geometry alone.
RAW10 and HDR photography modes are supported, helping retain visual information across scenes containing both bright and darker areas. For surveying, documentation, digital-twin and heritage workflows, this provides useful visual context alongside measured point-cloud geometry.
158,000 Point Cloud Measurements per Second
Owl outputs up to 158,000 point-cloud measurements per second, allowing dense spatial datasets to be collected across large environments. The scanner has an onboard 8-core 2.4 GHz processing platform with 16 GB RAM and a 256 GB SSD, with TF card expansion also supported.
The combination of onboard processing and high-speed point acquisition is intended for substantial spatial datasets such as factories, venues and large buildings. This allows data to be captured and reviewed in the field without relying solely on a separate workstation during acquisition.
Wireless Real-Time Preview on iPad
Owl supports Wi-Fi 5 connectivity for communication with a compatible iPad and external servers. Scanning data can be synchronised during acquisition, allowing captured results to be viewed while still on site rather than waiting until the project has returned to the office.
This gives operators an opportunity to inspect coverage and general data quality before dismantling the scanning setup. The current manufacturer specification lists an iPad with an M1 chip or later as the control system requirement.
Point Clouds, 3D Models and Panoramic Imagery
Owl provides several output formats for transferring captured spatial data into downstream surveying, visualisation and modelling workflows. Full-colour point clouds can be exported as PLY or E57, while colour polygonal models are available in OBJ format.
Panoramic imagery can also be exported as PNG files. Compatibility with individual CAD, BIM, point-cloud or visualisation applications depends on the software being used and the processing required for the final deliverable, so workflows should be checked before purchase where a particular software package is essential.
3DMakerpro Owl Applications
Architecture & Buildings
Capture rooms, structural layouts and larger built environments as spatial point-cloud data for building documentation, renovation planning and digital modelling workflows.
Facilities & Industrial Sites
Record factories, plant rooms, equipment layouts and commercial spaces where a measurable three-dimensional record of the existing environment can support planning and documentation.
Heritage & Digital Preservation
Combine measured spatial geometry with high-resolution colour imagery to create detailed digital records of historic buildings, interiors, museums and culturally significant spaces.
3DMakerpro Owl Technical Specifications
The following specifications are based on current manufacturer documentation supplied for the 3DMakerpro Owl Imaging Laser Scanner.
| Specification | 3DMakerpro Owl |
|---|---|
| Scanner Type | Stationary Imaging Laser Scanner |
| Accuracy | 5 mm @ 10 m |
| Scan Radius | 0.5–60 m @ 20% reflectivity |
| Scan Range | Up to 120 m |
| Field of View | 360° horizontal, 280° vertical |
| Point Cloud Frequency | 158,000 points/s |
| Laser Light Source | 905 nm |
| Laser Safety | Class 1, IEC 60825-1:2014 eye safe |
| Colour Cameras | 3 × 48 MP cameras |
| Photography Modes | RAW10 and HDR |
| HDR | Yes |
| Network | Wi-Fi 5 |
| Control System | iPad with M1 chip or later |
| Data Interface | USB Type-C × 1 |
| Point Cloud Output | PLY, E57 |
| Polygonal Model Output | OBJ |
| Panoramic Image Output | PNG |
| Internal Hardware | 8-core 2.4 GHz processor, 16 GB RAM, 256 GB SSD |
| Storage Expansion | TF card supported |
| Battery | 12,000 mAh |
| Operating Time | Up to 2 hours |
| External Power | Supported |
| Power Delivery | 65 W PD via USB Type-C |
| Dimensions | 199 × 139 × 100 mm |
| Weight | 1.6 kg |
| Accessory Support | Various accessories supported |
Who is the 3DMakerpro Owl For?
The Owl is aimed at users who need to digitise spaces rather than individual small objects. Its long-range stationary LiDAR system, wide field of view and colour imaging hardware make it suited to professional building capture, architecture, facilities documentation, industrial environments, heritage work and other projects where complete spatial context is more important than the fine surface resolution required for small engineering components.
If your project depends on a particular tolerance, CAD or BIM workflow, environmental condition or deliverable format, contact us with the application requirements and we can help assess whether Owl or another scanner is the more appropriate option.
Frequently Asked Questions
Does a 60 m radius mean Owl can scan an entire building from one position?
No. The 60 m specification applies to suitable visible surfaces at 20% reflectivity. Walls, equipment, furniture, columns and other obstructions can create blind spots, so additional scan positions may still be necessary to obtain complete coverage.
Is the quoted 120 m range a distance to one object?
The manufacturer documentation separately specifies a 0.5–60 m scan radius and an up-to-120 m scan range. This may refer to the overall measurable span across the scanner rather than a 120 m working distance from the scanner to a single target. Confirm the intended definition with us if maximum working distance is important to your application.
How accurate is the 3DMakerpro Owl?
The current manufacturer specification lists an accuracy of 5 mm at a distance of 10 metres. Accuracy requirements should always be assessed against the scale and tolerance of the intended project, particularly for survey, engineering or inspection work.
Can 3DMakerpro Owl scans be used in CAD or BIM?
Owl can export full-colour point clouds in PLY and E57 formats and coloured polygonal models in OBJ format. Whether these files can be imported directly into your chosen CAD or BIM software, and the amount of conversion or modelling required afterwards, depends on the application and intended deliverable.
What equipment is used to control the 3DMakerpro Owl?
The current manufacturer specification lists an iPad with an M1 chip or later as the control system, with communication over Wi-Fi 5. Confirm the current supported iPadOS version, application requirements and whether a compatible iPad is included in your chosen package before ordering.
Does the 3DMakerpro Owl capture colour?
Yes. Owl uses three 48 MP cameras alongside its LiDAR system to record visual information for colourised spatial data. RAW10 and HDR photography modes are also listed in the manufacturer specification.
How long can the 3DMakerpro Owl operate on battery power?
Owl contains a 12,000 mAh battery with a manufacturer-specified operating time of up to two hours. External power is also supported, including 65 W USB Type-C Power Delivery, which can be useful for longer scanning sessions.
Is the 3DMakerpro Owl suitable for scanning small engineering parts?
Owl is primarily designed for spatial and large-area capture rather than detailed close-range scanning of small components. If your priority is fine surface geometry, reverse engineering or dimensional inspection of a small part, a dedicated close-range 3D scanner may be more appropriate.
| Technical Specifications | 3DMakerpro Owl Technical Specifications
|
|---|
What's in the Box
- 1 x 3DMakerpro Owl LiDAR Scanner
