Kexcelled MOLEGRID™ Dental 3D Printing Resins
Kexcelled MOLEGRID™ dental resins are developed for professional dental 3D printing workflows, including dental models, surgical guides, dentures, casting patterns, impression trays, try-in parts, gingiva masks, and temporary crown and bridge applications. Designed for dental laboratories, clinics, and digital production environments, the range provides application-specific materials optimised for accuracy, surface quality, mechanical performance, transparency, flexibility, and reliable compatibility with modern 405nm LCD and DLP resin 3D printers, helping users select the correct material for each stage of the dental workflow rather than relying on a single general-purpose resin.
MOLEGRID™ Model Professional Dental Resin
MOLEGRID™ Model Resin is designed for producing accurate dental models used in restorative, orthodontic, and general laboratory workflows. It is suited to applications where surface detail, dimensional consistency, and clean post-processing are important for checking fit and planning further dental work.
- Suitable for dental models and diagnostic parts
- Designed for detail, accuracy, and stable print results
- Useful for crown, bridge, orthodontic, and lab workflows
MOLEGRID™ Ortho Model Resin
MOLEGRID™ Ortho Model Resin is developed for orthodontic model production, including models used for aligner planning, appliance fabrication, and treatment assessment. It is intended for workflows where consistent model geometry and reliable batch production are needed.
- Designed for orthodontic model printing
- Suitable for aligner and appliance workflows
- Supports repeatable production of accurate dental models
MOLEGRID™ Casting Wax Resin
MOLEGRID™ Casting Wax Resin is intended for dental casting workflows where printed patterns are used in investment casting. It is suitable for producing detailed wax-like parts that can support crown, bridge, partial framework, and other cast dental component production.
- Designed for dental casting patterns
- Suitable for crown, bridge, and framework workflows
- Supports high-detail printed parts for investment casting
MOLEGRID™ Gingiva Mask Resin
MOLEGRID™ Gingiva Mask Resin is a flexible material used to simulate soft gum tissue in implant and restorative workflows. It is designed to help dental technicians check emergence profiles, implant positions, and prosthetic fit against a more realistic soft tissue representation.
- Flexible resin for soft tissue simulation
- Useful for implant and restorative dental models
- Helps validate fit around gingival areas
Prepare & Validate
Import validated dental files from intraoral scans or CAD software, then configure the correct resin profile, layer height, and support settings for the intended dental application. Proper preparation helps maintain dimensional accuracy and repeatable print quality across models, guides, and prosthetic components.
Print with Controlled Accuracy
Dental resins require stable exposure settings and consistent curing behaviour to achieve accurate margins, surface detail, and reliable fit. MOLEGRID™ resins are designed for modern 405nm LCD and DLP workflows commonly used in dental laboratories and digital dentistry environments.
Wash, Cure & Finish
After printing, parts are washed and post-cured to achieve their final mechanical properties and dimensional stability. Depending on the material, this may include polishing, fitting checks, soft tissue simulation, or preparation for clinical and laboratory use within restorative and orthodontic workflows.
MOLEGRID™ SG Surgical Guide Dental 3D Printing Resin
MOLEGRID™ SG Surgical Guide Resin is made for printing transparent surgical guides used in implant planning and guided dental procedures. The material is designed to support high-detail printing, allowing drill sleeves, guide channels, and anatomical fit surfaces to be produced accurately from digital treatment plans.
- Designed for dental surgical guide production
- Transparent finish for improved visibility during use
- Suitable for implant planning and guided surgery workflows
MOLEGRID™ Temp C&B Dental 3D Printing Resin
MOLEGRID™ Temp C&B Resin is developed for temporary crown and bridge applications, giving dental users a printable material for short-term restorative work. It is intended for producing temporary restorations that need a balance of accuracy, handling strength, and patient-specific fit.
- Suitable for temporary crowns and bridges
- Designed for restorative dental 3D printing workflows
- Supports accurate fit and practical chairside or lab use
MOLEGRID™ Denture Dental 3D Printing Resin
MOLEGRID™ Denture Resin is designed for producing denture bases and dental prosthetic components where fit, durability, and surface quality are important. It is intended for dental laboratories that need a resin suitable for repeatable denture workflows, helping reduce manual production steps while maintaining a practical finish for post-processing.
- Developed for digital denture base production
- Suitable for dental laboratory and prosthetic workflows
- Designed for accurate printing and reliable post-processing
MOLEGRID™ Try-In Dental 3D Printing Resin
MOLEGRID™ Try-In Resin is used for producing trial dentures and fit-check components before final prosthetic production. It helps dental teams assess shape, occlusion, aesthetics, and patient comfort before committing to the final material, reducing adjustment time and improving confidence in the digital workflow.
- Used for denture try-in and fitting checks
- Helps validate shape, fit, and bite alignment
- Supports a more controlled prosthetic production workflow
