Recreus PETG
The Recreus PET-G filament presents excellent mechanical properties comparable to ABS. High adhesion between layers make it the perfect material to produce technical parts and forget about warping and cracking problems. The Recreus PET-G does not need a hot table for certain pieces with reduced size, for larger pieces it is recommended to use a hot bed between 45-60ºC.
Technical Features
- Diameter tolerance +/- 0.03mm
- Excellent mechanical properties
- High interlayer adhesion
- Heat-bed temperature 45-75ºC (You can use 3D Lac or similar adhesives)
- Glossy and high transparency
- Odourless
- Solvent resistant (acetone, paint solvent etc)
- New winding process 100% knot-free
Printing Recommendations
- Layer Height: 0.08-0.3 (for 0.4mm nozzles) Optimum results 0.15mm
- Speed: 15-100mm/s. Optimum 35-45mm/s
- Temperature: 235-260ºC. Optimum 240ºC
- Retraction Speed: 25-160mm/s
- Retraction Length: 3.5-6.5mm (optimum 4.5mm)
- Travelling Speed: 120-180mm/s
| Material | PETG |
|---|---|
| Colour | White |
Write Your Own Review
What's in the Box
- 1 x Recreus PETG - White
