Phrozen Sonic Mighty Revo 16K Resin 3D Printer
-
Phrozen Aqua 8K Grey
£49.99 £41.66 -
Phrozen Cure Mega S
£429.61 £358.01 -
Phrozen Heat & Mix
£240.01 £200.01
The Phrozen Sonic Mighty Revo is now available in ultra-high-resolution 16K, delivering even finer detail, sharper surfaces and exceptional print quality. Combining its 10.1-inch 16K LCD with smart monitoring, auto-levelling, built-in heating and advanced failure detection, the Mighty Revo 16K is designed for precise, reliable resin 3D printing.
In Stock
Add-On:
Phrozen 3D Printer 90-min Setup & Training
Phrozen Sonic Mighty Revo 16K Resin 3D Printer
The Phrozen Sonic Mighty Revo 16K takes the popular Mighty Revo platform to an even higher level of detail with a 10.1-inch 16K monochrome LCD and an ultra-fine 14 × 19 μm XY resolution. With smaller pixels than the previous 14K model, the Revo 16K produces sharper edges, smoother surfaces and exceptional fine detail across miniatures, prototypes, jewellery models and highly detailed display pieces.
High resolution is combined with a generous 211.68 × 118.37 × 235 mm build volume, smart print monitoring, assisted levelling and a built-in 30°C chamber heater. Whether you're producing detailed one-off models or running repeated print jobs, the Sonic Mighty Revo 16K is designed to deliver accurate and consistent resin 3D printing with less manual intervention.
Ultra-High 16K Resolution
The Mighty Revo 16K features a 15120 × 6230 pixel monochrome LCD with a precise 14 × 19 μm XY pixel size. Compared with the previous Mighty Revo 14K's 16.8 × 24.8 μm resolution, the smaller pixels allow finer textures, cleaner edges and smoother surfaces to be reproduced with impressive accuracy.
This extra detail makes the Revo 16K particularly well suited to miniature printing, character models, intricate prototypes, jewellery designs and other applications where small surface details matter.
Smart Residue Detection
Protect your printer and reduce the risk of failed prints with the Mighty Revo's intelligent detection system. Sensors can identify unexpected objects or cured resin between the build plate and release film during the early stages of a print, helping prevent unnecessary pressure from being applied to the LCD.
Smart Print Failure Detection
The Mighty Revo 16K provides an additional layer of protection by detecting abnormal printing behaviour and helping identify potential failures before an entire print job is wasted. Combined with remote monitoring through the Phrozen GO App, this gives users greater confidence when running longer or more complex resin prints.
Monitor Your 3D Printer with Phrozen GO
Stay connected to your Mighty Revo 16K using the Phrozen GO App. Remote monitoring and printer management make it easier to keep an eye on ongoing prints from your smartphone, helping you respond quickly if a problem occurs.
For workshops or print farms operating multiple compatible Phrozen printers, the app can also help centralise printer monitoring and make managing several machines more convenient.
Assisted Levelling for Easier Setup
The Mighty Revo 16K uses assisted levelling to simplify calibration and help users achieve a correctly prepared build plate before printing. This reduces setup time while helping create consistent first layers and reliable adhesion across the build area.
Built-In 30°C Chamber Heater
Resin performance can change significantly with temperature, particularly in colder workshops and during the winter months. The Mighty Revo 16K features an integrated chamber heater designed to maintain a consistent temperature of around 30°C during printing.
Keeping the resin warm helps maintain more predictable viscosity and printing behaviour, improving consistency and reducing temperature-related failures.
Designed for Cleaner Resin Printing
The Sonic Mighty Revo includes features designed to make it easier to manage fumes and odours produced during resin printing. Its air purification and ventilation options make it easier to integrate the printer into a properly ventilated resin printing workspace.
The built-in exhaust connection can also be connected to suitable ventilation equipment, allowing fumes to be directed away from the printing area.
Large-Format Detail with Mighty Revo 16K
The Sonic Mighty Revo 16K combines high-resolution printing with a substantial 211.68 × 118.37 × 235 mm build volume. This gives users the flexibility to print larger models as single pieces or produce multiple smaller components and miniatures within the same print job.
A rigid metal frame, dual linear rails and ball screw Z-axis provide a stable platform for long prints, while the 405 nm COB light source with Fresnel lens delivers consistent illumination across the build area.
Sharper | Smoother | More Detailed
With its 10.1-inch 16K monochrome LCD and ultra-fine 14 × 19 μm XY resolution, the Phrozen Sonic Mighty Revo 16K is capable of reproducing exceptionally small surface details while keeping layer lines and pixelation to a minimum. The result is smooth, highly detailed resin prints that require less finishing and preserve intricate features even on small-scale models.
| Custom FAQ | What is the resolution of the Phrozen Sonic Mighty Revo 16K?The Phrozen Sonic Mighty Revo 16K features a 10.1-inch 16K monochrome LCD with a resolution of 15120 × 6230 pixels and an XY pixel size of 14 × 19 μm. This ultra-fine resolution allows the printer to reproduce small textures, sharp edges and smooth surface details, making it especially well suited to miniatures, jewellery models, prototypes and other highly detailed resin prints. What is the build volume of the Phrozen Sonic Mighty Revo 16K?The Sonic Mighty Revo 16K has a build volume of 211.68 × 118.37 × 235 mm. This gives you enough space to print larger models as single pieces or produce multiple smaller parts and miniatures in one print, while still benefiting from the high level of detail provided by the 16K LCD. What is the difference between the Mighty Revo 14K and Mighty Revo 16K?The main upgrade is the higher-resolution 16K LCD, which delivers a finer 14 × 19 μm XY pixel size compared with the larger pixels of the previous Mighty Revo 14K. The Revo 16K also features a built-in 30°C chamber heater and retains the Mighty Revo's smart monitoring, failure detection and connected printing features, giving users improved detail alongside a more controlled resin printing environment. Does the Phrozen Sonic Mighty Revo 16K have a built-in heater?Yes. The Sonic Mighty Revo 16K includes an integrated chamber heater designed to maintain a temperature of approximately 30°C during printing. Keeping the resin at a more consistent temperature helps stabilise resin viscosity and can improve printing reliability, particularly in colder workshops or during winter. Does the Sonic Mighty Revo 16K have automatic levelling?The Mighty Revo 16K includes an assisted levelling system designed to simplify build plate setup and calibration. This helps users achieve consistent first layers without relying entirely on manual levelling, making the printer easier to set up and helping reduce print failures caused by incorrect plate positioning. What resin can I use with the Phrozen Sonic Mighty Revo 16K?The Sonic Mighty Revo 16K uses 405 nm UV-curable resin and is compatible with a wide range of standard, high-detail, tough, engineering and specialist 405 nm resins. Resin exposure settings vary between materials, so it is recommended to begin with the manufacturer's suggested profile and carry out a calibration print before starting larger or more detailed jobs. Can I monitor the Mighty Revo 16K remotely?Yes. The Phrozen GO App allows compatible Mighty Revo 16K printers to be monitored and managed remotely. Users can keep track of print progress and printer status from a smartphone, while workshops operating several compatible Phrozen printers can use the platform to make multi-printer monitoring more convenient. Which slicer software works with the Phrozen Sonic Mighty Revo 16K?The Sonic Mighty Revo 16K is designed to work with resin 3D printing slicers such as CHITUBOX, with profiles and settings available for compatible materials. When changing resin or printing particularly detailed models, it is worth running a calibration test first, as exposure times and support settings may need adjusting for the specific resin and print geometry. |
||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Technical Specifications |
Product Information
|
What's in the Box
- 1 x Phrozen Sonic Mighty Revo 16K Resin 3D Printer
- 1 x Build Plate
- 1 x Resin Vat
- 1 x Air Purifier
- 1 x 310 x 220 mm PFA (nFEP) Release Film
- 1 x USB Drive
- 1 x Metal Scraper
- 1 x Plastic Scraper
- 1 x Plastic Funnel
- 3 x Resin Filter Papers
- 1 x Set of Allen Wrenches
- 1 x Pair of Gloves
- 1 x 1.5 m Power Cable
- Warranty / Information Cards
What is the resolution of the Phrozen Sonic Mighty Revo 16K?
The Phrozen Sonic Mighty Revo 16K features a 10.1-inch 16K monochrome LCD with a resolution of 15120 × 6230 pixels and an XY pixel size of 14 × 19 μm. This ultra-fine resolution allows the printer to reproduce small textures, sharp edges and smooth surface details, making it especially well suited to miniatures, jewellery models, prototypes and other highly detailed resin prints.
What is the build volume of the Phrozen Sonic Mighty Revo 16K?
The Sonic Mighty Revo 16K has a build volume of 211.68 × 118.37 × 235 mm. This gives you enough space to print larger models as single pieces or produce multiple smaller parts and miniatures in one print, while still benefiting from the high level of detail provided by the 16K LCD.
What is the difference between the Mighty Revo 14K and Mighty Revo 16K?
The main upgrade is the higher-resolution 16K LCD, which delivers a finer 14 × 19 μm XY pixel size compared with the larger pixels of the previous Mighty Revo 14K. The Revo 16K also features a built-in 30°C chamber heater and retains the Mighty Revo's smart monitoring, failure detection and connected printing features, giving users improved detail alongside a more controlled resin printing environment.
Does the Phrozen Sonic Mighty Revo 16K have a built-in heater?
Yes. The Sonic Mighty Revo 16K includes an integrated chamber heater designed to maintain a temperature of approximately 30°C during printing. Keeping the resin at a more consistent temperature helps stabilise resin viscosity and can improve printing reliability, particularly in colder workshops or during winter.
Does the Sonic Mighty Revo 16K have automatic levelling?
The Mighty Revo 16K includes an assisted levelling system designed to simplify build plate setup and calibration. This helps users achieve consistent first layers without relying entirely on manual levelling, making the printer easier to set up and helping reduce print failures caused by incorrect plate positioning.
What resin can I use with the Phrozen Sonic Mighty Revo 16K?
The Sonic Mighty Revo 16K uses 405 nm UV-curable resin and is compatible with a wide range of standard, high-detail, tough, engineering and specialist 405 nm resins. Resin exposure settings vary between materials, so it is recommended to begin with the manufacturer's suggested profile and carry out a calibration print before starting larger or more detailed jobs.
Can I monitor the Mighty Revo 16K remotely?
Yes. The Phrozen GO App allows compatible Mighty Revo 16K printers to be monitored and managed remotely. Users can keep track of print progress and printer status from a smartphone, while workshops operating several compatible Phrozen printers can use the platform to make multi-printer monitoring more convenient.
Which slicer software works with the Phrozen Sonic Mighty Revo 16K?
The Sonic Mighty Revo 16K is designed to work with resin 3D printing slicers such as CHITUBOX, with profiles and settings available for compatible materials. When changing resin or printing particularly detailed models, it is worth running a calibration test first, as exposure times and support settings may need adjusting for the specific resin and print geometry.
