MakerBot ABS-R Filament

£78.29 £65.24
SKU
MB-ABS-R
*Available for pre-order only, won't ship until February 2022.

MakerBot ABS-R Filament

ABS is one of the most popular materials for injection moulded consumer products due to its clean surface finish, durability, and heat resistance. METHOD X can print manufacturing-grade ABS without warping and without weakening additives thanks to its 100°C heated chamber.


Compatibility

The ABS-R filament was created to be used with the MakerBot Method X and Methos X carbon Fibre, with 1XA and 2XA filament extruders. The filament is also compatible with Method RapidRinse, a support filament that dissolves in pure tap water so it’s easy to use in just about any environment. Allowing more difficult geometric shapes to be made and the support structure will simply wash away leaving almost no marks on the object that you wish to create.


Colours

This new Filament style comes in Red, Neutral and Black

More Information
Material ABS
Technical Specifications

Tech Specs

PRINTER COMPATIBILITY

  • METHOD X
  • METHOD X Carbon Fibre

EXTRUDER COMPATIBILITY

  • Model 1XA Extruder
  • Model 1C Extruder
  • LABS GEN 2 Experimental Extruder

Material Properties:

  • Heat Deflection (ASTM 648, 66 psi) = 84°C
  • Flexural Modulus (ASTM D790, 15 mm/min) = 77 MPa
  • Tensile Strength at yield (Type 1, 0.125", 0.2"/min) = 43 MPa
  • Tensile Modulus (ASTM D638, 50 mm/min) = 2,400 MPa
  • Strain at Yield - Elongation (%) = >2.6%
  • Notched Impact Strength (ASTM D256) = 26 J/m

Weight

  • Shipping Weight: 1.1kg
  • Net Weight: 0.65
Write Your Own Review
You're reviewing:MakerBot ABS-R Filament

1 x filament of whatever colour that you buy